Setup guide

Rent Blake2b Hashrate to Umbrel or StartOS (XBT)

By the TideHash team · · 8 min read

If you run a home server on Umbrel or StartOS, you can connect rented Blake2b hashrate to your own DATUM gateway. This setup allows you to direct external mining power to your node for XBT (also listed as BTCB2). The rented hashrate connects exactly like your own miners: it points at your gateway, and your gateway points at your pool.

This guide covers the specific apps required for Umbrel and StartOS, the correct miner ports, router configuration, and how to verify that shares are being accepted.

What you need (Blake2b-capable Knots + gateway app)

Before ordering, ensure your device meets these requirements:

  • Bitcoin Knots for XBT. Your node must be fully synced and running a Blake2b-capable build. Lazarus Pool asks gateway operators to run Knots 29.4.2 or later. Knots 29.4.3 is the release that implements the 180-day coinbase maturity for coins mined from block 979,919. The coinbase maturity guide covers the current rule and the earlier window. An older node can build blocks the network rejects.
  • A DATUM Gateway app. You need a gateway application that supports the XBT chain. The standard SHA-256 datum_gateway does not work for XBT.
  • Public reachability. The gateway's miner port must be accessible from the internet. Rented hashrate connects from external servers, not your local network.
  • Payout address. An XBT address from a wallet dedicated to this chain.

Umbrel: Retropex store, Knots, DATUM (blake2b)

Umbrel users must use community apps from the Retropex store to support XBT.

  1. Install Blake2b Knots. Add the Retropex community app store (https://github.com/Retropex/Bitcoin-store) to your Umbrel. Install the Blake2b-capable Bitcoin Knots build. Ensure it is fully synced.
  2. Install DATUM (blake2b). Install the DATUM (blake2b) app from the same store. Do not use the official Umbrel DATUM app for this: that app is the SHA-256 (BTC) gateway and listens on port 23334.
  3. Configure the app.
    • Set your XBT payout address in the app's Config tab.
    • Verify the Knots version matches your pool's requirements (29.4.2 or later).
    • Note the miner port. Per the community Umbrel guide, the DATUM (blake2b) app uses port 23339, not the default 23334. Always use the port displayed in the app.

StartOS: community registry packages and the XBT check

StartOS users should install a gateway package that serves Blake2b work for XBT. Many DATUM packages, including the official OCEAN/Start9 datum package, are built for SHA-256 Bitcoin and will not work here.

Two packages that publicly describe Blake2b support (checked 10 Nov 2026):

  • CONVOY DATUM Gateway 0.5.0. Add the mempool.guide community registry, then install Bitcoin Knots and the #pow-tagged Datum Gateway, or sideload the datum.s9pk package. CONVOY describes 0.5.0 as updated for Bitcoin's Blake2b proof of work. The CONVOY StartOS walkthrough points miners at port 23334.
  • paulscode datum-blake2b. Add the community registry https://start9.paulscode.com and install datum-blake2b with its knots-blake2b dependency. This package is built to serve Blake2b work. Its preferred stratum port is 23336, and its dashboard is on 7153. Read the port from the StartOS Interfaces tab, because the assigned port can differ. Recent releases need StartOS 0.4.0.2 or newer.

Before ordering, confirm that the package you actually installed serves Blake2b work, and use the miner port the device shows. Point the gateway config at your XBT pool's host, port, and public key.

Forward the miner port (and keep the admin page private)

Rented hashrate connects to your gateway over the internet. You must forward the miner port from your router to your Umbrel or StartOS device.

  • Forward only the miner port. Forward port 23339 (Umbrel DATUM blake2b), 23336 (paulscode StartOS datum-blake2b, or whatever Interfaces shows), or 23334 (CONVOY and other default gateways) to your device's local IP.
  • Keep admin pages private. The status and admin page (port 7152, or 7153 on the paulscode StartOS package) must remain on 127.0.0.1 or your LAN. It uses plain HTTP basic auth and should never be exposed to the internet.
  • Hide node RPC. Never expose the node RPC port (8332).
  • Security setting. Enable require_address_username in your gateway config. This ensures the gateway rejects workers that do not provide a valid address in their username.

Test connectivity from a device outside your network before placing an order. Use the miner port your app actually shows:

nc -vz your-gateway-host 23339

If the output says "succeeded" or "open," the port is reachable.

Fill in the TideHash order

Once your gateway is live and reachable, place your order on the TideHash order form.

FieldWhat to enter
Pool URLYour gateway's public host and miner port (e.g., your-gateway-host:23339). stratum+tcp:// is added automatically.
Pool userYour XBT address, followed by a worker name (e.g., bc1q…example.rent01).
Passwordx (unless your gateway requires otherwise).

Order basics:

  • Minimum speed: 1 TH/s.
  • Duration: 1 to 720 hours.
  • Account: No account is required to place the order.
  • Delivery: Metered by accepted shares.

You can add a public XBT pool as a backup in the form to prevent downtime if your home internet fails.

Check shares on the device

After payment is confirmed, verify that hashrate is arriving:

  1. Gateway status page. Access http://127.0.0.1:7152 (or your LAN IP; use 7153 on the paulscode StartOS package). The rented worker should appear with accepted shares.
  2. TideHash order link. Your private order link will show delivered hashrate and accepted shares.
  3. Pool dashboard. Check your XBT address on your pool's website. The hashrate should appear there within a few minutes.

Delivery is based on accepted shares. If shares are not appearing, the gateway or pool is not accepting the work.

Troubleshooting

  • No shares arriving. Run nc -vz your-gateway-host <miner-port> from outside your network. Common causes include unforwarded ports, firewall blocks, or listen_addr set to 127.0.0.1 in the config.
  • Miners connect but no job. The node may still be syncing, or the gateway cannot reach the pool. Check the gateway logs for connection errors to the pool host.
  • Worker refused. If require_address_username is true, the Pool User in your order must start with a valid XBT address.
  • Blocks rejected. Ensure your Bitcoin Knots version is 29.4.2 or later. An older node can build blocks the network rejects.

Questions

Can I use the standard DATUM gateway for XBT?

No. The original datum_gateway is for SHA-256 Bitcoin. For XBT, you need a Blake2b-capable build, such as the RATUM gateway, the DATUM (blake2b) app on Umbrel, CONVOY's 0.5.0 StartOS package, or paulscode's datum-blake2b package.

Which port do I use in the order form?

Use the gateway's miner port. For the Umbrel DATUM (blake2b) app, this is 23339. For CONVOY's StartOS package it is often 23334. For paulscode datum-blake2b it is preferably 23336 (confirm on the Interfaces tab). Do not use the pool's DATUM port or the admin port (7152 or 7153).

Do I need to create a TideHash account?

No. You can place an order without an account. You will receive a private link to track your order and change settings.

Sources

Ready to test your gateway?Place an order from 1 TH/s.

Place an order

Ready to test your gateway? Place an order from 1 TH/s. Questions? Ask in our Discord.

More guides