Hardware

Blake2b miners for Bitcoin (XBT)

Bitcoin (XBT) is mined with Blake2b ASICs. Most machines that work were built for Siacoin, which uses the Blake2b-Sia variant, and they mine XBT on stock firmware. Below are 12 models with their rated hashrate, power and efficiency in Blake2b-Sia (SC) mode, the source for each figure, and whether the machine hashes Blake2b for XBT: yes, no or unknown. Where no source publishes a value, we write unknown.

XBT support: 9 yes, 0 no, 3 unknown. Switchable Goldshell models count in SC mode only.

Want to mine Bitcoin (XBT) without the noise and heat of miners at home? Rent hashrate on TideHash, or ask us about Buy & Host below, and point it at your own DATUM gateway or pool. New to an order? Read what happens on your first order or the payment-to-finish guide. TideHash serves one chain only: why we serve only Bitcoin (XBT).

ModelHashes Blake2b (XBT)Hashrate (SC)Power (SC)Efficiency
Goldshell SC5 Pro IIXBT: yes14 TH/s3,300 W236 J/THSpecs
Goldshell SC5 ProXBT: yes11 TH/s2,820 W256 J/THSpecs
Goldshell SC LiteXBT: yes4.4 TH/s950 W216 J/THSpecs
Goldshell SC Box IIXBT: yes1.9 TH/s400 W211 J/THSpecs
Goldshell HS5 (SC mode)XBT: yes5.4 TH/s1,500 W278 J/THSpecs
Goldshell HS6 SE (SC mode)XBT: unknown8.2 TH/s2,000 W244 J/THSpecs
Goldshell HS Box II (SC mode)XBT: yes1.2 TH/s325 W271 J/THSpecs
Goldshell KD5 (SC mode)XBT: yes9.3–9.5 TH/s (measured in-house)unknownunknownSpecs
Goldshell KD5 Pro (SC mode)XBT: unknownunknownunknownunknownSpecs
iBeLink BM-S3+XBT: yes25 TH/s3,400 W136 J/THSpecs
iBeLink BM-S3XBT: yes19 TH/s3,100 W163 J/THSpecs
iBeLink BM-S1 MaxXBT: unknown12 TH/s3,150 W262 J/THSpecs

Most Kadena (KD) miners do not mine XBT

Goldshell KD models and iBeLink BM-K units are built for Kadena, which uses Blake2s, not Blake2b, so as a rule they do not mine XBT and have no page here. In our own test on 27 Oct 2026, a Goldshell KD Box Pro switched to its Blake2b (SC) setting showed 0 H/s on Blake2b over 90 seconds, and every share it produced was a hardware error. Two exceptions are listed: the KD5, which hashed Blake2b at 9.3–9.5 TH/s on two of our own units the same day, and the KD5 Pro, which Goldshell documents with a KDA/SC switch and whose XBT support is still unknown.

BTC (SHA-256) miners

Bitcoin (XBT) is mined with Blake2b. SHA-256 ASICs mine BTC (SHA-256), so they cannot mine XBT or connect to TideHash.

Running on TideHash

We run Goldshell HS5 units in SC mode ourselves. On 25 Oct 2026, our 42 HS5s showed a median of 5.49 TH/s each (5-minute average, measured at the pool), close to the rated 5.4 TH/s.

Connect it as a partner

Own Blake2b miners? Connect them to TideHash as a partner. You sign up with a worker name, point each rig at the TideHash stratum with its own worker name, and renters’ orders run on that hashrate. Sign up on the partner sign-up page, then follow the step-by-step setup guide. Questions? Email info@tidehash.com or ask in our Discord.

Rent XBT hashrate

Don’t want to run hardware? Rent Blake2b hashrate on TideHash and point it at your own Bitcoin (XBT) pool. You choose the speed and duration, and you can watch delivery on your pool. You can pay in Bitcoin (XBT), BTC (SHA-256), USDT or USDC. Start here.

Buy & host with TideHash

Want this hardware without the noise and heat at home? Buy it through TideHash and have it hosted with us (Asia & European Hosting). We quote on request.

Hosted machines can rent out their hashrate on TideHash as partners. When it is not rented, a partner’s hashrate can mine to their own DATUM gateway or pool.

To ask about buying or hosting a Blake2b miner, email info@tidehash.com.

Sources

Rated figures are the maker’s nominal values as listed by these sources; real units vary. Efficiency is calculated from the rated power and hashrate. Values no source publishes are shown as unknown. Checked 2 Nov 2026.