Rent Bitcoin (XBT) hashrate: what happens to your order, from payment to finish
XBT is Bitcoin, mined with Blake2b, and TideHash rents Blake2b hashrate for it. This guide follows one order through its whole life, based on what the order form, the order page and the payment system actually do: where the hashrate goes, how you pay, what each status means, what happens when hashrate drops, and how cancellation and refunds work today.
Short on time? Start here has the 3 steps, and your first order, explained fits on one page.
Before you order: where the hashrate goes
Every order needs a destination. You have two options:
- Your own DATUM gateway (recommended). Run a DATUM or RATUM gateway next to a synced Bitcoin Knots node and enter its miner port. The gateway's default port for miners is
23334. The DATUM gateway guide covers the setup. - An XBT pool. Many XBT pools are DATUM-only, and direct stratum ports may not be supported for XBT, so check the pool's own guidance before you order. XBT mining pools compared shows how each pool connects. Our partner pool is RIPTIDE (
tides.maveth.ca), but you can send your hashrate to any pool you like.
The pool user is usually your XBT payout address, often with a worker name after a dot, such as bc1q...example.rig01. Use an address from a wallet set up for the XBT chain, not a BTC (SHA-256) exchange address. The pool settings guide lists every field.
Two optional extras are worth the minute they take:
- A backup pool. It is used only if your main pool can't be reached. While the order mines to the backup it still counts as delivered, and it switches back once the main pool works again.
- An email address. With one, you get your private order link, a notice when your payment is confirmed and a notice when your order finishes. Without one, save the order link yourself after ordering, because it can't be resent.
Step 1: Fill in the order form
You set three numbers: speed in TH/s, duration in hours, and your price per TH/s per day, in USD or BTC (SHA-256). The total is speed × price × days, and the form shows the exact total and the current minimum order before you pay.
The base price is the standing price for all unrented capacity: the higher of the live price and its 1-hour average. A paid bid at or above it stays eligible for hashrate until the order ends, even if the base price rises later. While capacity is free, such a bid is normally filled; when capacity is sold out, higher bids are filled first and lower ones wait in the queue. A bid below the base price is refused when you submit. Everything you paid for is kept.
Before the order is sent, the form checks the pool address: that the host exists, is public and answers like a mining pool. If the check fails you can still choose "Order anyway", so read the warning first: most rental problems come down to the pool URL, username and password. The form also shows a hint when an address doesn't look like a DATUM gateway miner port. That hint never blocks the order.
If your first order qualifies for a new-customer discount, the order form shows the exact amount before you pay.
Step 2: Pay for that one order
Each payment covers exactly one order, and you don't need an account. Right after you submit, the page shows the exact amount, the address and a QR code, plus a button that opens the payment page.
| Method | Where you pay |
|---|---|
| Bitcoin (XBT), BTC (SHA-256) | Right on the order page. No payment fee with Bitcoin (XBT) or BTC (SHA-256). See paying with XBT. |
| USDC | Secure payment page, on BNB Smart Chain, Solana or Ethereum |
| USDT | Secure payment page, on BNB Smart Chain, Solana, Ethereum or TRON |
| Other coins | Secure payment page (for example LTC, DOGE, ETH, SOL) |
| Binance Pay | In the Binance app, paid in USDT from your Binance account |
| Card | "Card & more" payment page |
Methods other than Bitcoin (XBT) and BTC (SHA-256) can add a payment method fee, and when they do, the amount on the payment step already includes it. If you pay from an exchange, make sure the amount that arrives is exactly what the payment page shows, because some exchanges take something off.
What the system does with the amount that arrives:
- Exact amount: the order is paid, and hashrate starts once the payment is confirmed on its network.
- More than asked: the payment is accepted, and the extra becomes bonus time on the same order at its own price and speed. Your order page shows it as a bonus line.
- Less than asked, or too late: the order goes to "Needs review". Email info@tidehash.com with your order number.
- Nothing: the order expires as "Not paid in time". An unpaid order costs you nothing.
Step 3: Hashrate starts
Once the payment is confirmed, the order moves into the live order book. Your private order link shows one of these statuses:
| Status | What it means |
|---|---|
| Running | Mining to your pool now. |
| Queued | Paid, waiting for free capacity at your price. It starts automatically. |
| Bid too low | Paid, but your price is below the current base price. Raise it to start. Everything you paid for is kept. |
| Paused | Paid, temporarily paused. It resumes automatically. |
| Finished | Fully delivered. |
Delivery is measured by accepted shares at the TideHash stratum proxy, so what counts is work your pool actually accepted. An order finishes when everything you paid for has been delivered, not at a fixed clock time.
Step 4: Watch delivery
Give it a few minutes after the payment confirms, then check two places:
- Your private order link or Look up your rental on the home page. Paste the wallet address from your pool user to see your orders, delivery so far and live speed. It shows order details only, never an email, a payment address or anyone else's order.
- Your pool dashboard. Your worker appears after its first accepted shares. Pools average hashrate over time windows, so look at a 1-hour average before drawing conclusions.
If hashrate drops
There are three common reasons, and none of them makes you lose paid time:
- You were outbid. Your order slows down or waits in the queue, keeps every hour you paid for, and finishes later. You can raise your price from your private order link to get hashrate sooner.
- Your pool can't be reached. With a backup pool, the hashrate mines to the backup and counts as delivered. Without one, the order pauses and that time doesn't count against it. It resumes on its own once your pool answers again. You can also change the pool from your private order link or through Look up your rental, and the new pool is tested before the switch.
- Your bid fell below the base price before it started. A queued order below the base price shows "Bid too low" and gets no hashrate until you raise it. Once an order has started at or above the base price, it runs until it ends.
Want more speed or more hours? Your private order link has a top-up option, which you can also pay with Binance Pay.
Cancellation and refunds
There is no cancel button on the order page, and TideHash has no published refund policy. If something is wrong with an order, email info@tidehash.com with your order number or ask in our Discord.
Without anyone stepping in, the rules above cover the usual cases: an unpaid order expires and costs nothing, an overpayment becomes bonus time, an outbid order keeps its paid time, and time your pool is unreachable without a backup doesn't count against the order.
What renting does not buy is a fixed result. What your pool pays for the work depends on network difficulty, pool luck and the pool's own rules, and it isn't guaranteed.
Ready to rent Bitcoin (XBT) hashrate?Live order book, no account needed. The form shows the minimum order.
Open the order formQuick FAQ
Is XBT Bitcoin?
Yes. XBT is Bitcoin, mined with Blake2b. Pools write it as XBT, and some exchanges list the same coin under another ticker, so check the ticker on the exchange you use. What is XBT? explains the tickers and how Bitcoin (XBT) compares with BTC (SHA-256).
Do I need an account to rent hashrate?
No. Each payment covers one order, and your private order link works without an account. An email is optional: with one, you get the order link, a notice when the payment is confirmed and one when the order finishes.
Can I pay with USDC?
Yes. USDC works on BNB Smart Chain, Solana or Ethereum. You can also pay with Bitcoin (XBT), BTC (SHA-256), USDT, other coins, Binance Pay or card.
What happens if my pool goes down during the rental?
With a backup pool, the hashrate mines to the backup and still counts as delivered. Without one, the order pauses and that time does not count against it. It resumes on its own once your pool can be reached again.
Can I cancel an order and get a refund?
There is no cancel button on the order page, and TideHash has no published refund policy. If something is wrong with an order, email info@tidehash.com with your order number or ask in our Discord.
New here? Start here, read the step-by-step rental guide, or ask in our Discord.